専門:
固体酸化物形燃料電池,外燃機関,ヒートポンプ,高効率エネルギー変換システム
経歴:
1994年
1994-2001年
2001-2002年
2002-2006年
2007年
2010年
|
東京大学 大学院工学系研究科 博士課程修了,博士(工学)
(株)日立製作所 機械研究所
(株)日立製作所 研究開発本部
東京大学 大学院工学系研究科 助教授
東京大学 大学院工学系研究科 准教授
東京大学 生産技術研究所 教授 |
研究テーマ:
- 固体酸化物形燃料電池(SOFC)の研究
- 次世代外燃機関,ヒートポンプの研究
学会:
- 日本機械学会,日本伝熱学会,日本冷凍空調学会,SOFC研究会,日本造船学会,日本ガスタービン学会
Selected papers:
- Shikazono, N., Kanno, D., Matsuzaki, K., Teshima, H., Sumino, S. and Kasagi, N.,
Numerical Assessment of SOFC Anode Polarization Based on Three-Dimensional Model Microstructure Reconstructed from FIB-SEM Image,
J. Electrochem. Soc., 157 (5), pp. B665-B672 (2010).
- Iwai, H., Shikazono, N., Matsui, T., Teshima H., Kishimoto M., Kishida R., Hayashi D., Matsuzaki K., Kanno D., Saito M., Muroyama H., Eguchi K., Kasagi N. and Yoshida H.,
Quantification of Ni-YSZ Anode Microstructure Based on Dual Beam FIB-SEM Technique,
J. Power Sources, 195 (4) , pp. 955-961 (2010).
- Han, Y. and Shikazono, N.,
Measurement of liquid film thickness in micro square channel,
Int. J. Multiphase Flow, Vol. 35, pp. 896-903 (2009).
- Shikazono, N, Sakamoto, Y., Yamaguchi, Y. and Kasagi, N.
Microstructure and polarization characteristics of anode supported tubular solid oxide fuel cell with co-precipitated and mechanically mixed Ni-YSZ anodes,
J. Power Sources, Vol. 193, pp. 530-540 (2009).
- Han, Y. and Shikazono, N.
Measurement of the liquid film thickness in micro tube slug flow,
Int. J. Heat Fluid Flow, Vol. 30, pp. 842-853 (2009).
- Shikazono, N.,Itoh, M., Uchida, M., Fukushima, T. & Hatada, T.,
An Analytical Model to Predict The Condensation Heat Transfer Coefficient in Horizontal Micro-Fin Tubes,
ASHRAE TRANSACTIONS, Vol. 104, No. 2, pp. 143-152 (1998).
- Kasagi, N. & Shikazono, N.,
Contribution of Direct Numerical Simulation to Understanding and modeling Turbulent Transport,
Proc. R. Soc. London, A, Vol. 451, No. 1941, pp.257-292 (1995).
受賞:
- 1995年度日本伝熱学会奨励賞
- 2000年度日本伝熱学会技術賞
- 2009年度日本機械学会論文賞
- 2009年度第22回中小企業優秀新技術・新製品賞,優秀賞/産学官連携特別賞
- 2009年度日本機械学会熱工学部門貢献表彰
- 2010年度日本伝熱学会学術賞
- 2010年度日本機械学会熱工学部門講演論文表彰
- 東京大学-コマツ産学連携実用化賞
- 第61回栃木県発明展覧会文部科学大臣奨励賞
- 2017年度第29回中小企業優秀新技術・新製品賞,優秀賞/産学官連携特別賞
- 第67回栃木県発明展覧会文部科学大臣奨励賞
- 2018年日本機械学会熱工学部門業績賞
|